Concrete Resurfacing & Overlays in Cooper City FL - a fresh surface on a sound slab
Faded, stained or hairline-cracked concrete on your patio, garage or pool deck? We put a new surface on a slab that's still solid underneath.
Find out if your slab can be resurfaced
Call (754) 206-8021, and I'll tell you straight whether your slab is a resurfacing job or a replacement job before you spend a dollar on it.
Can my worn concrete be resurfaced instead of replaced?
Concrete resurfacing in Cooper City puts a thin decorative layer, such as a spray texture, knockdown or micro-topping, over a slab that's still sound. A worn, stained or faded patio, garage or pool deck ends up looking new for a fraction of what tearing it out would cost.
We're based in Cooper City and work in the cities around it, and most of the resurfacing calls I get are about a patio, garage or pool deck that's started to look tired. A slab that's worn, stained, faded or has fine hairline cracks is usually a good fit. Deep cracks that keep moving, heaving, sinking, crumbling or a failed base underneath make it a replacement job, because an overlay over a failing slab fails fast. I'll also tell you up front that old cracks can show back through. The price moves with the size and shape of the area, since a curved deck takes more labor than a rectangle, and with how much crack repair and prep the slab needs before anything goes on. The schedule mostly turns on the weather, because one maker's guide says its resurfacer goes on best out of direct sun and off hot, windy days, with rain kept off for at least 4 hours afterward, so plan on an install date that may move. Your written estimate lays out the prep, the product and the finish for your slab.
Why Cooper City homeowners call Northstar for resurfacing
I test your slab myself
I come out myself to look at the floor, test the slab and ask how you use the space. That way any hard truths come out at the estimate, not after the overlay goes down.
Coating concrete since 2021
I spent years at a dealership service desk watching shop floors peel, then learned grinding and coating on an installer's crew and opened in 2021. Our own installers do the work, not a crew we hire out.
Licensed and insured in Florida
We're licensed and insured. With Florida's licensing board, a certified license covers the whole state, while a registered one covers only where the contractor holds a certificate of competency, so it's worth asking.
On a resurfacing job, what's under the overlay decides how it holds up, so the first thing I'll want is a look at your slab. Set up a slab assessment and we'll go from there.
How we handle concrete resurfacing and overlays
I start by looking at the slab and telling you honestly whether it's a resurfacing job or a replacement job, because an overlay can't fix a slab that's failing underneath. If it's a good fit, our crew repairs the cracks that need it and preps the surface so the new layer can grab. One maker of these resurfacers calls for removing all unsound concrete and getting the surface free of dust, grease, oil and dirt first. Then we lay the overlay in the finish you picked and clean up.
Sometimes a slab needs a different fix. When the real problem with an indoor floor is dips and low spots, self-leveling concrete and overlays flow out flat in a way a textured overlay won't. When the concrete wraps around a pool, our pool deck coatings and resurfacing work covers the finishes that deck needs.
Spray texture or knockdown
A textured layer is sprayed on, and for knockdown the peaks are troweled lightly flat. It suits patios, walkways and decks where bare or wet feet need grip, and it hides small flaws well.
Micro-topping
A thin, smooth layer is troweled on in coats. It suits garages, entries and indoor slabs where you want a clean, even look, and because it hides less, prep matters even more.
How do you know your concrete is ready for resurfacing?
Faded or stained surface
The top has gone chalky gray, or it has oil and rust stains that won't scrub out. Usually only the surface is worn, and the longer it sits, the deeper the stains soak in.
Fine hairline cracks
Thin cracks run across the slab, but nothing has lifted or dropped. That's usually surface shrinkage on a sound slab, though water working into the cracks can widen them into a repair job.
Chipped or flaking spots
In some patches the top has popped off and the stone underneath shows. It can still be resurfaced, but the patches grow over time, and the repair before the overlay costs more.
Sections sinking or lifting
One edge has dropped, or a section rocks or lifts at a crack. That usually points to the base underneath, which means replacement, and waiting tends to turn it into a trip hazard.
What happens after you call about resurfacing in Cooper City?
Call and I test the slab
Call (754) 206-8021 or send the form, and I'll come out, test the slab and ask how you use the space. Your written estimate lays out the prep, the product and the finish.
Our installers prep and resurface
If you go ahead, our own installers repair the cracks, prep the surface and lay the overlay. Clear furniture, grills and planters off the area beforehand so they can start right in on prep.
We walk the finished floor
When it's done, I walk the floor with you and show you anything worth watching, like an old crack line. The job is backed by our satisfaction guarantee.
Resurfacing questions we hear most
Here's what Cooper City homeowners usually ask me about resurfacing. If your slab doesn't fit any of these, call or send photos and I'll talk it through with you.
Can my cracked concrete slab be resurfaced?
Usually yes, if the cracks are fine hairlines on a solid slab. Moderate cracking, chipped spots or slight unevenness can often be resurfaced too once the cracks are repaired and the surface is prepped, but that repair adds to the cost. One Florida guide advises having a contractor assess the slab before assuming resurfacing will work, which is why I test it at the estimate.
Will old cracks show through a new concrete overlay?
They can, and I'd rather you hear it from me now. One resurfacer maker says existing control joints, the cut lines that give concrete a place to crack, should be kept, and that cracks from below can come through the new surface, especially where those joints aren't adequate or the slab settles. If your slab has settled or cracked, expect some of those cracks to show up again.
How long does a concrete resurfacer take to cure before I can walk on it?
One maker says its resurfacer takes light foot traffic in 4 to 6 hours and wheeled traffic in 12 hours, on average. Other products have their own times, so I'll go over the ones for your product before we start.
Which finish is best for a pool deck in Florida?
Most Florida homeowners end up with a knockdown or a cool-deck finish, a textured surface made to stay cooler underfoot, because the same Florida guide says slip resistance and heat reflection steer the choice. Both give wet feet some grip, and I'll ask how your deck gets used before we pick one.
How much does concrete resurfacing cost in Cooper City?
Your price comes from the written estimate, because it turns on the size and shape of the area, how much crack repair and prep the slab needs, and the finish you choose. Curved edges and extra crack repair are what push it up most. If the slab turns out to be a replacement job, I'll tell you before you spend money on an overlay.
What causes a concrete overlay to peel or flake?
Most of the time the problem is underneath, either a slab that's sinking, crumbling or sitting on a failed base, or a surface that wasn't clean and sound enough for the new layer to bond. Cheap material is the other common cause, because that Florida guide says the state's sun and moisture are hard on it and advises hiring a contractor who specifies products rated for Florida's climate.
Get your slab assessed and priced
Send a few photos of the cracks and the rough size and shape of the area, and we'll reply within one business day. Then I'll set a time to come out for a free on-site estimate, with no obligation.
Resurfaced concrete finishes
Other concrete work we do
Self-Leveling Concrete & Overlays
When an indoor floor has dips, low spots or an uneven pour, a self-leveling layer flows out flat before any coating or finish goes on top.
Learn morePool Deck Coatings & Resurfacing
If the slab you want redone wraps around a pool, deck work brings finishes chosen for wet bare feet, strong sun and a cooler walking surface.
Learn more