Polished Concrete Flooring in Cooper City FL - your own slab, ground to a shine
Stuck with worn tile or a peeling coating? We grind and polish the concrete you already have to the shine you pick.
Get your slab tested for polishing
Call (754) 206-8021 or send the form, and I'll come test the slab, because nobody can tell you what your floor needs until it's tested.
What does polishing a concrete floor in Cooper City involve?
Polished concrete flooring takes the indoor slab already under your Cooper City home and turns it into the finished floor. We grind it with diamond tools, harden it with a densifier, add a guard coat and polish it to the gloss you pick.
When people call about polishing, they're usually pulling up tile or carpet, or living with a tired coating, and they want to know if the concrete underneath can be the floor. Usually it can, and the price and the schedule come down mostly to how much has to come off or get fixed on your slab and how much shine you're after, which is why your written estimate spells out the prep, the product and the finish. If your job turns out to need a permit, we take care of it with the city's building office before work starts, and if it isn't clear, we ask the office instead of guessing.
Why Cooper City homeowners call Northstar Cooper City Epoxy Flooring for polished concrete
The owner tests your slab first
I come out myself and test the slab, since older Florida homes built on slab-on-grade sometimes have moisture trouble and a moisture test is recommended before polishing. I'd rather find it at the estimate.
Our own crew, since 2021
I learned this work grinding and coating concrete on an installer's crew, then started this business in 2021. Our own installers do the work, so the people grinding your slab answer to me.
We're licensed and we're insured
We're licensed and insured. Florida's licensing agency says a certified license lets a contractor work anywhere in the state, while a registered one only counts where they hold a certificate of competency.
On a polished floor, the slab itself is the finish, so the testing and prep carry the whole job. Set up a visit and I'll come take a look at yours.
How we handle polished concrete flooring
We look hard at the slab first, because old tile glue, paint or patches change how much grinding it takes, and then we agree in writing on the shine you want, since more shine means more passes. Our installers grind the surface with diamond tools, starting coarse to open it up and stepping finer to hone it smooth. Next comes a densifier, which hardens the surface by filling the concrete's natural pores with more of the mineral that gives concrete its strength. Then they add a guard coat, polish the slab up to the gloss we wrote down and clean up after themselves.
Color is optional, and a dye can go in during polishing if you'd like a tint in the floor. For deeper, mottled color, stained concrete flooring may suit you better, and if you love the look of stone chips running through the floor, terrazzo flooring is its own kind of build that I'm happy to talk through.
A satin or low sheen
This suits living spaces where you want the concrete to look finished but soft, without throwing much light back at you. It's a good fit if you'd rather the floor feel calm than shiny.
A high gloss
This suits open rooms where you want the floor to reflect light, like a kitchen that runs into a living area. It's more work, so we write the exact level into your estimate.
Is it time to polish the concrete under your floor?
Tile cracking or sounding hollow
Cracked tile or tile that sounds hollow when you tap it is usually letting go of the slab. Left alone, more pieces pop loose and you end up patching the same spots over and over.
A coating peeling up
Paint or epoxy lifting in patches usually means it never bonded well to the concrete. The longer it goes, the more the ragged edges catch, chip and spread across the room.
Carpet that's worn through
Matted paths and stains that won't lift usually mean the carpet is finished, and the pad underneath holds whatever spills. The slab under it may already be most of a floor.
Bare concrete looking blotchy
A bare slab that looks chalky, gray or blotchy is usually unsealed and soaking up whatever hits it. Each new stain sets deeper, so waiting means more to grind out later.
What happens after you call us about polished concrete in Cooper City?
We talk, then I visit
After you call or send the form, I come out, look at the floor, test the slab and ask how you use the room. Then you get a written estimate.
Our installers prep and polish
If you go ahead, our own installers do the prep the estimate calls for. Then they grind, densify and polish to the shine we agreed on in writing.
We walk the floor together
When the crew finishes, I walk the floor with you and check it against what we wrote down. Ask me anything about it, as many times as you like.
Polished concrete questions we hear
Here's what people in Cooper City ask most before they polish a slab. If your floor has its own wrinkle, call or send the form and I'll talk it through with you.
Can my tiled or epoxy floor in Cooper City be polished?
Usually, yes, once the tile, the adhesive under it or the old epoxy is ground off and any damaged or uneven spots are repaired. That removal and repair comes before the polishing steps begin, so a covered floor takes more prep than a bare slab. I can't tell you how much until I see what's under there.
How long does a high-gloss polished concrete floor take compared to a lower sheen?
A high gloss takes longer, because each step up in shine needs more grinding passes with finer diamond tools, more densifier coats and more time. If you want a floor that shines like glass, plan on a longer job than a satin finish would need.
Is a glossy polished concrete floor slippery?
In one trade group's tests, polished concrete passed the required slip rating by a wide margin, even at very high gloss levels. Slip resistance did change with gloss level in those tests, but not with how much stone showed in the surface.
How do I care for a polished concrete floor?
One Florida flooring guide advises dust mopping daily or as needed, and damp mopping weekly with a pH-neutral cleaner. The same guide advises a maintenance coat of densifier or guard product every 3 to 5 years in a home, so it's worth planning for a recoat down the road.
How much does polished concrete flooring cost in Cooper City?
I can't give you an honest number until I've seen and tested your slab, because the price comes mostly from what's on it and how much shine you want. A bare, sound slab at a soft sheen costs less than a floor under tile glue or epoxy that you want at high gloss. That's what the estimate visit is for.
Do I need a permit to polish concrete floors in Cooper City?
The city's permit list doesn't settle it, because Cooper City's Building Division names work like residential alterations, additions and slabs, not concrete polishing. You can ask the Building Division about your floor at (954) 434-4300, and as I said above, we'll handle a permit if your job needs one.
Get a written estimate for your polished floor
Tell us your room sizes, what's on the floor now and the shine you want, and we'll reply within one business day. Then I come out for a free on-site estimate, and there's no obligation to go ahead.
Polished concrete, a closer look
Other ways to finish concrete
Stained Concrete Flooring
If you'd rather have warm, mottled color across your slab than plain gray, a stain soaks color into the concrete for a look that varies across the floor.
Learn moreTerrazzo Flooring
For chips of marble or glass showing across the floor, terrazzo is built as a new surface and ground smooth, a pattern plain polishing can't give you.
Learn more