Epoxy Floor Coatings in Cooper City FL - a coating that holds to the slab
Peeling, stained or dusty concrete in your garage or patio? We test and prep the slab first, so the new coating holds.
Book a slab test for your epoxy floor
Call (754) 206-8021 seven days a week until 11 PM, or use the form if it's easier to type out what your floor is doing.
What goes into an epoxy floor coating in Cooper City?
An epoxy floor coating in Cooper City is a hard, glossy finish built up in layers over your concrete, so oil and water stay on top and a garage, patio or shop floor wipes clean. The work that decides how it turns out happens before the first coat, when the slab gets tested and ground.
Maybe the old garage floor coating is peeling where the tires sit, or the patio is bare concrete that soaks up every drip. What moves the price is mostly what's under the coating, so the size of the floor, whether the slab needs a moisture fix, how much cracking and oil we have to grind out, and whether it sits in the sun all count. The schedule turns on which system you choose and on the weather. Your written estimate spells out the prep, the product and the finish, and since we're based in Cooper City and work in the cities around it, I'm usually not far from your floor.
Why Cooper City homeowners call Northstar for epoxy floor coatings
The owner tests your slab
I come out myself to look at your floor and test the slab. If there's a problem under there, I'd rather you hear it from me at the estimate than find it later.
Our own installers since 2021
We've been in business since 2021, and the people grinding and coating your floor are our own installers. You deal with the same small crew from the first coat to the last.
Licensed, insured and easy to check
We're licensed and insured. Broward County runs an online contractor license search where you can look up any installer before you sign anything.
On an epoxy floor, the prep matters more than the color you pick, so the first step is getting the slab looked at. Book a slab test and estimate or call (754) 206-8021.
How we put down an epoxy floor coating
First I test the slab for moisture, because a coating is only as good as what's under it. Our installers then grind the concrete to open up the surface, patch cracks and chipped spots, and lay a primer, a base coat, a flake or metallic layer and a topcoat before cleaning up. If your floor gets direct sun, like a garage with the door up most afternoons, we'll talk through a topcoat that holds its color better, since the sun here turns standard epoxy topcoats yellow and chalky over time. The sun-resistant kind costs more, and one Florida guide calls it essential wherever a floor gets sun, so I'd pay for it on any floor that sees daylight.
Garages are one of our most common calls, and garage floor coatings get their own page with more on oil-stained slabs and flake colors. For shops, warehouses and offices, our commercial and industrial epoxy floor coatings start with the same testing and grinding, with a system picked for how the business uses the floor.
Flake epoxy for busy garages
Colored chips spread into the base coat hide dust and give your feet some grip, which suits a garage that sees cars and kids. One Florida guide puts a flake floor in a two-car garage at one to two days of installation.
Metallic epoxy for a showpiece floor
Metallic epoxy is the premium pick, with color that flows into custom patterns, so it suits a room you want people to notice. By that same guide's count, it takes two to three days to install.
Polyaspartic when time is short
Polyaspartic goes over the same prep, cures faster and is often finished in a single day in a two-car garage. It also handles humidity better while it's going down, which helps a lot here in summer.
How can you tell your concrete floor needs a coating?
Coating lifting in patches
Old paint or coating peeling up where your tires park usually means it never bonded to the slab. The longer it goes, the more comes loose and the more there is to grind off.
Dust and stains everywhere
Bare concrete that sheds dust and soaks up oil is open to everything you spill. Old oil sinks deeper over time, and that makes it harder to clean out before a coating.
Yellow or chalky finish
A floor that's gone yellow or chalky near the door is usually a topcoat that couldn't take the sun. It keeps fading and wearing thin, and the concrete underneath loses its cover.
Cracks and chipped spots
Hairline cracks and chipped spots, what we call spalls, let water and dirt get under any coating. Small ones are a quick patch, but left alone they spread and cost more to fix.
What happens after you call about an epoxy floor?
Call and book a slab test
Call or send the form, and I'll come test the slab and ask how you use the space. Your written estimate lists the prep, the product and the finish.
Our installers prep and coat
If you go ahead, our own installers do the work, grinding and repairing the slab before laying each coat. We'll tell you ahead of time which days to keep off the floor.
Walk the finished floor together
When the last coat is down, I walk the floor with you and look it over. Ask me anything about it, as many times as you need.
Epoxy floor questions we hear most
These are the questions I get most at estimates around Cooper City. If yours isn't here, call or send the form and I'll walk you through how it applies to your floor.
How much does an epoxy floor coating cost in Cooper City, FL?
Epoxy floor coating in the Miami area usually runs about $5 to $8 per square foot, and that covers materials, floor prep and application. A slab that needs a moisture fix first will come in higher. Your own figure comes from the written estimate after I test the slab, and every job is backed by our satisfaction guarantee.
Does my older concrete slab need a moisture fix before epoxy?
Often it does, because Florida's high water table pushes moisture up through concrete slabs from below. Many slabs over 15 years old, or poured without a vapor barrier under them, need moisture mitigation before coating, and that adds to the cost. It's a fair thing to ask any installer how they test, since one Florida guide calls moisture testing essential, not optional.
What is the best way to prep concrete for an epoxy floor?
Grinding the concrete by machine is the best way. One maker's guide calls roughening the slab by machine the first choice and the safest method, and says acid etching is hard to rinse and neutralize fully and won't remove oil or other petroleum products. If your floor has oil marks, it needs machine prep, which is why grinding is our standard.
When is the best time of year to put down epoxy in South Florida?
October through March is the best window if your dates are flexible, according to one Florida guide, because humidity is lower and the coating cures better. Florida's humidity slows epoxy curing and can leave defects on the surface, so we time the work around it whatever the month.
What's the difference between a certified and registered contractor license in Florida?
A certified license lets a contractor work anywhere in Florida, while a registered license only covers the cities or counties where they hold a local certificate of competency. Broward County issues those certificates as its local contractor licenses, so the county's license search shows what an installer holds here.
What causes an indoor epoxy floor to fail in humid weather?
Added moisture from humid air can make even an indoor coating fail, because outside weather can sometimes sharply change the humidity inside. One maker's epoxy guide lists normal drying conditions as above 55°F for the first 72 hours, with humidity normally below 85%, so we check the room before each coat goes down.
A slab test and written epoxy estimate
Tell us the floor's size, how old the slab is and how much sun it gets, and we'll reply within one business day. I'll come test the slab and give you a free written estimate with no obligation.
Epoxy floor finishes, up close
Other floor work we do
Commercial & Industrial Epoxy Floor Coatings
For a shop, warehouse or office floor that takes forklifts, carts or daily foot traffic, we build a coating system around how the business uses the space.
Learn moreGarage Floor Coatings
If your garage has oil spots, tire marks or old paint lifting, this covers flake finishes and how we prep a floor that has cars on it daily.
Learn more