Flooring Contractor in Coral Springs, FL - Garage and Pool Deck Floors That Hold Up
Northstar Cooper City Epoxy Flooring is a flooring contractor based in Cooper City, FL that works in Coral Springs, testing and prepping concrete slabs, then coating, staining or resurfacing garages, pool decks, patios and business floors.
- Licensed and insured.
- Free in-person estimates.
- We reply within 1 business day.
Concrete floors for Coral Springs homes
Coral Springs is a drive north of us in Cooper City, and the calls we get there mostly come from single-family homes with an attached garage, a screened pool or a back patio that's seen better days. There are townhouse and condo communities too, plus shops and offices along the main roads that need a floor that can take daily traffic. It's the same mix of work we do in Pompano Beach and Plantation, but every slab gets looked at on its own.
The houses here went up over several decades, so we find everything from bare concrete to a garage painted twice by past owners to a patio hiding under old tile. Since they sit on concrete slabs poured right on the ground, the job starts with what's on that concrete and what's coming up through it, not with the color you pick.
Floor work we do in Coral Springs
Garage Floor Coatings
Lots of Coral Springs garages have a painted slab that's flaking at the tire marks. We test the slab first, then grind the paint off and coat it.
Pool Deck Coatings & Resurfacing
Pool decks here sit in full sun and stay wet, so old coatings chalk, crack and get slick. We repair the cracks and resurface with a textured finish.
Stained Concrete Flooring
Many houses here hide a sound slab under old tile or carpet. Once that's up, we can make it a stained concrete floor that's easy to clean.
Concrete Floor Stripping & Removal
In older homes here, tile mortar, carpet glue or a failed coating has to come off first. We strip it to bare concrete so the next floor bonds.
Polyaspartic Floor Coatings
Garages here often sit with the door open to hot afternoon sun. We usually top those with polyaspartic, a clear coat that yellows less than plain epoxy.
Commercial & Industrial Epoxy Floor Coatings
Coral Springs has plenty of shops, offices and warehouse bays with worn concrete. We coat them with epoxy systems built for carts, foot traffic and daily mopping.
What Coral Springs floors are up against
South Florida sun and summer storms are hard on outdoor and garage concrete. A pool deck here bakes all afternoon and then gets soaked, and a garage with the door up takes the same sun across its front half, so a cheap coating chalks, fades and turns slick. We pick products for sun and water first, add texture where bare feet and wet shoes go, and then we talk color.
Old finishes are the other thing we run into on these houses. Your price and your schedule mostly come down to how much the slab needs before it's ready, because grinding off old paint or glue, filling cracks and waiting on a damp slab all take labor and time. The written estimate lists what yours needs, so nothing about it is a surprise later.
Get a written estimate for your Coral Springs floor
We reply within one business day, and the on-site estimate is free with no obligation. I come out to your Coral Springs home myself to look at the floor and test the slab, and then you get a written estimate that lays out the prep, the product and the finish. If you go ahead, our own installers do the work and I check the finished floor with you.
Coral Springs floor questions
These are the questions that come up about floors in Coral Springs, from peeling garages to county paperwork. If your floor raises a different one, call and ask, and I'll walk you through it.
How much does it cost to coat a garage floor in Coral Springs?
There's no set price until I've seen your floor, because the cost turns on the square footage, the condition of the slab and the coating system you choose. A solid color with a clear topcoat usually costs less than a full flake or metallic finish, and a polyaspartic topcoat costs more than plain epoxy but holds up better in the sun. Call (754) 206-8021 and the written estimate will show each of those pieces.
Do I need a permit to redo a garage floor or pool deck in Coral Springs?
That's for the City of Coral Springs building office to say, so we ask them instead of guessing. When a job does need a permit, we take care of it with the city before any work starts. Either way, you'll know where it stands before your floor goes on the schedule.
Does a flooring contractor need a Broward County business tax receipt to work in Coral Springs?
In most cases, yes, since the Broward County Tax Collector says anyone doing business in the county needs a Broward receipt unless they qualify for an exemption, and that includes one-person and home-based companies. A state-certified contractor holding a receipt from another Florida county may work across the state without it, but some Broward cities may still require the Broward receipt before they issue a permit. Broward receipts expire every September 30, and renewal opens on July 1.
What causes epoxy to peel or bubble on a garage floor in Coral Springs?
Most of the time it's moisture coming up through the slab or a surface that was never ground open, so the coating had nothing to grab. A slab here can look dry while it's pushing moisture up from the ground, and that lifts a coating from underneath, which shows up as bubbles or peeling at the tire marks. That's why I test the slab and we grind it before anything goes on, and if the test says it's wet, I'll tell you at the estimate.
How long does a garage floor or pool deck coating take in Coral Springs?
The schedule is set by the prep and the cure, so we give you yours at the estimate once the slab is tested. Bare, sound concrete moves along faster than a floor with old paint to grind off or cracks to fill, and each coating has a cure time from its maker before you can walk or park on it. Summer storms and heavy humidity can push a coat back, and we'd rather wait than put it down on damp concrete.
What is the best way to fix a cracked, slippery pool deck in Coral Springs?
For most decks, the best fix is to repair the cracks, remove the failing coating and put down a textured coating or overlay, a thin new concrete surface, instead of painting over what's there. Paint over a chalky, cracked deck usually peels in the sun and stays slick when it's wet. If the concrete underneath is breaking up, I'll tell you so at the estimate, because a coating won't hold on a slab that's moving.
Coated and finished concrete floors
More cities we work in
If you're looking for another city, check the list or give us a call, because we work across the cities around Cooper City and are happy to talk.